IC housing is approved for use in direct contact with insulation
Housing adjusts vertically for various ceiling thicknesses
Break-away bar hangers easily extend and will not fall out of plaster flange, providing sturdy installation
Snap-In Socket locates lamp in optimum location
No clips required. Secure bar hanger to T-Bars with wires or screws
Tab to locate on bottom of joist
Meets airtight requirements for 2.0 CFM or less air leakage
Junction box with integral romex connector, quick push and lock connector and through circuit wiring with 4 in, 4 out #12 wire, saves installation time.
The hinged junction box door allows full access for wiring while remaining attached to the recess housing
Tighten screw to lock bar hangers in place
Integral captive nails included and positioned for fast, easy installation
