Sea Gull Lighting designs its recessed housings for ease of installation and to exacting standards of efficiency, quality and safety. Choose from 4", 5" and 6" models for remodel or new construction projects with a variety of recessed trims for various lighting effects.
D: 6 3/8'' L: 13 1/2'' W: 10 3/4'' H: 7 13/16''
Safety Listed for Damp Locations
Safe - Thermally Protected/Listed for Damp Location: Non-IC housings are approved for use where insulation is kept at least 3" away from housing.
Housing Adjustment: Housing adjusts vertically for various ceiling thicknesses.
Bar Hanger: Break-away bar hangers easily extend and will not fall out of plaster flange, providing sturdy installation.
Joist Tab: Tab to locate on bottom of joist.
Notch for T-Bar Ceilings: No clips required. Secure bar hanger to T-Bars with wires or screws.
Sealed Trim: One piece sealed trims. No light leaks.
Quick Hit: Integral captive nails included and positioned for fast, easy installation.
Bar Hanger Locking Screw: Tighten screw to lock bar hangers in place.
Hinged Door: The hinged junction box door allows full access for wiring while remaining attached to the recess housing.
Junction Box with Integral Romex Connector: Junction box with integral romex connector, quick-push and lock connector and through circuit wiring with 4 in, 4 out #12 wire, saves installation time.